PROJECT INFORMATION

Applications: choose the water-management function

Start with where water comes from and where it should go. Storage, treatment, transfer and infiltration solve different tasks and may form parts of one coordinated system.

Connect the functions

For collection and storage, compare AquaBox and BlockTech according to the duty. Use AquaBox where storage connects to separately selected treatment or pumping equipment. Use BlockTech for runoff storage with a controlled outlet or, where the site permits, infiltration.

Typical project contexts

The source material describes water accumulation, flow equalisation, stormwater regulation and infiltration. Underground arrangements can be considered for developed sites, including parking areas, subject to the applicable structural and ground design. This does not establish a traffic load rating.

Choose by the route of the water

For collected runoff, first distinguish storage for later use from temporary storage with a controlled discharge. Infiltration is another route: the water passes from the reservoir into suitable surrounding soil. A lined storage arrangement and a permeable infiltration arrangement therefore serve different purposes. Treatment concerns water quality; transfer concerns where the water must go. These functions may be combined with storage, but neither follows automatically from choosing a tank volume. Compare the two product pages and the relevant stage below, then use the product information packs to discuss the configuration and supply scope.

Follow the system stages

Use the collection and storage stage to compare reservoir functions, the treatment stage to discuss water quality, and the transfer stage to distinguish gravity flow from pumping. The infiltration stage explains the route into the ground. This sequence keeps each component tied to a clear duty when reviewing an offered system.