US PROJECT PLANNING

Inspection and maintenance

Define accessible inspection and maintenance expectations

Planning the project

Define ownership, safe access, pretreatment cleaning, sediment observation, inlet and outlet checks, pump and control tests where applicable, post-storm inspection triggers, records and escalation. Frequencies must follow the approved project plan and authority requirements.

Create an asset-specific maintenance record

Record the owner, installed layout, inspection locations, pretreatment, inlet and outlet controls and any pumping equipment. Identify who can carry out each task safely and how removed sediment or collected material will be handled. Keep equipment manuals linked to the installed asset.

Define observations and response

Document what staff need to observe: sediment accumulation, inlet blockage, outlet condition, standing water and equipment alarms where present. The project plan should identify inspection triggers, escalation and cleaning methods. Use the approved operating plan to set frequencies rather than assuming a universal interval.

Preserve access and change history

Keep inspection routes usable after landscaping or other site changes. Record inspections, cleaning, defects and replaced components, then review changes that affect water quality, loading or catchment inflow with the responsible team. Handover should establish how records remain available to the next operator.

Project design and review

A preliminary concept is not a final drainage design. Confirm the controlling rainfall basis, allowable discharge, groundwater and flood context, geotechnical conditions, structural loads, construction access, maintenance route and applicable authority requirements for the specific site.

Primary public references

Use the current agency material and the requirements adopted for the project location.

Follow the project duty from site evidence to product review. Detention, infiltration and water reuse require different inputs.